How to Order Splashbacks for Traders
Follow these steps when making your glass splashback order:
- Choosing Finishes – Colours, Designs or Images must be confirmed by email,clearly specifying all details required.
- Measure & Fit - Please provide drawings, rough dimensions for estimated costs prior to calling a site survey
- If you are not using our Measure & Fit service then the below will apply when placing an order on behalf of your clients:
Ordering with Templates:
Glass ordered by templates must be accompanied with a full-scale template to the correct dimensions. Each template must be marked with information:
- Customer Name
- Order No. or Reference
- Glass Type
- Edge Finish
- Hole Type, Size and Locations
- Face Side
Templates should be made from a solid material such as 6mm - 8mm MDF, 6mm plywood, Corrugated Tubular Plastic Sheets “Corex” (not a
surface protector) Templates constructed out of paper, corrugated cardboard, fibrolite or glass cannot be accepted!
All irregular shapes requiring polished edges and any circular polishing requirements should be on minimum 6mm plywood or MDF to enable our machines to plot the pattern.
Patterns should not have any protruding staples, nails, or screws, as sharp objects may damage the glass or cutting tables during processing. All holes and cutouts must be clearly marked in the exact position on the
Ordering by Drawings:
Technical/Digital Drawings - Orders can be submitted using CAD drawings in DXF, DWG format.
Manual/Hand Drawings should be submitted for conversion and approval as templates may be required in their place.