Ideal for single panel splashbacks. No cut-outs, notches are available. Only rectangular or square shaped panels can be ordered online.

1 - Measure Your Kitchen

First you need to measure everywhere you would like to have your glass splashback fitted.

We advise to make a 2mm reduction from each side of any panel when measuring.

Ensure you check for consistency of your proposed area. The height and width needs to be the same across the whole area for your panel to fit into.

If fitting glass between objects, such as kitchen units, ensure you check both front and back widths are the same. If the front spacing is smaller, the panel may not fit through to the back wall.

We accept both hand & digital drawings, as well as templates from materials such as Correx or MDF.

measure your kitchen

2 - Choosing Your Colour

To agreed a price you will need to choose what finish you would like your glass splashback to be.

Plain colours are our best value finishes, with more exclusive collections increasing in price.

To determine what colour would look best in your kitchen, we recommend ordering a sample from any of our collections. these give the best indication of final colour in your kitchen’s layout & lighting.

view all sample collections

3 - Making your Order

Once you have decided your colour and have your measurements, you can place your order.

Simply find your splashback colour from our DIY Splashbacks Section, enter your sizes, select any additional sparkle add-ons and choose your fixing type.

Choose from either a Showroom pick-up or courier delivery and complete your order through the checkout.

Don’t forget you can order a matching chopping board to go with your splashback. Check out all the colours Here.

buy spalshbacks online

4 - Collecting/Delivering your Order

Once your order has been manufactured & passed all final quality checks, we will contact you to arrange collection or delivery of your order.

You splashback can be delivered by courier, or you can pick it up at out Watford Showroom.

splashback delivery

5 - Install Your Splashback

If you are not using your own fitter, follow these tips on installing our glass splashbacks.

When using Silicone Adhesive:

  • Squeeze out 2cm blobs around 10cm apart to the back of your glass. (avoid placing to close to the edges)
  • Press the glass firmly against your wall. Ensure pressure is applied all across the glass.
  • If an area of the glass shows movement when pressed to the wall, remove panel and add more silicone to that area.
  • Leave to set for 24 Hours before applying decorative silicone around the edges of your glass.

Your beautiful glass splashback is now installed!